Upload Gcode - MAKER MADE M2 Complete Beginner Assembly Manual
Automated cutting machine kit
Hide thumbs
Also See for M2:
- Setting up (52 pages) ,
- Complete beginner assembly manual (38 pages) ,
- Setup manual (14 pages)
Table of Contents
Advertisement
M2 ASSEMBLY GUIDE
13. UPLOAD GCODE:
Click "upload Gcode" and select the Gcode file you created in Easel.
You'll know your Gcode loaded correctly when CNCjs displays the paths of the Gcode you
loaded! You already set the dimensions and depths in Easel for the M2, so it's ready to start!
We recommend a one foot or one meter square as your first test cut for calibration, set to cut
outside the shape path.
39
This work is licensed under the creative commons Attribution
NonCommercial-NoDerivatives 4.0 International license.
Last Updated 11.09.2020
Version 1.14
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the M2 and is the answer not in the manual?