Highlights; Assembly - Maxxus MX-J206-01 Instruction Manual

Highlights

a. High quality craftsmanship
b. Automatic thermostat for constant temperature
c. Timer and buzzer: buzzer sounds 5 minutes before the end of the sauna session
d. Digital sensor and thermometer
e. Infrared carbon heat emitter panels
f. Power supply:
Main Power: main power to sauna room
HT1, HT2, HT3, & HT4: power to heaters
Light: power to reading lamp
CTRL: power to control panel
CD/SIG: communication to MP3 Jack,
Fuse Reset: resets the power supply
g. MP3 Jack
h. Buckles

Assembly

Assembly Requirements
a. You will need a Philips screwdriver, ladder, and two adults to assemble.
b. Do not plug any other appliances into the power supply of the sauna room other than the designated sauna
connections/plugs.
c. Assemble the sauna room on a completely level surface.
d. Do not spray or get water on the exterior/interior walls of the sauna room.
separator to keep the sauna high & dry.
e. Do not store flammable objects or chemical substances near the sauna.
Speakers,and temperature sensor
4
If the floor is damp, install a floor