Maxxus MX-J206-01 Instruction Manual page 10

FIG 11 Assembling Front Panel FIG 12 Installing Roof Cover
12. Place cords/wires of Front Panel and Back Panel into the sauna room area to avoid damaging the cords/wires during
the roof installation. Open the door, lift the Roof Panel up and over the sauna room, and gently lower it into place resting
it on the wall panels. See FIG 12. Make sure that all cords/wires are slipped through the corresponding holes in the
Roof Panel. Proceed in screwing the Roof Panel down. See FIG 13
.
FIG-13 Slip cords/wires through corresponding holes
13. Connect all the wires and connectors to the corresponding outlets on the Roof Panel. Please be sure all the plugs are
connected snug and tight. See FIG-14.
FIG-14 Connecting cords/wires connectors
9