Running A Control Solution Test - EPS Bio Technology EMV3.1 User Manual

Running A Control Solution Test

You need the meter, a test strip, and control solution.
1. Put a test strip into 2. The meter turns on.
the meter in the Press M button or C button to select CS, press
direction of the power button to confirm the control solution mode.
arrow. ( means control solution mode,
before meal mode and
Note: Setting the meter in control solution mode will prevent the control solution reading from
being added to your memory and averages.
3. Place the meter on a flat
surface, like a table.
4. Remove the control
solution bottle cap and
wipe the tip of the bottle
with a tissue.
5. Squeeze the bottle until a
tiny drop forms at the tip of
the bottle and place
solution on top of bottle
means
cap.
means after meal.)
23