Understanding Control Solution Test Results - EPS Bio Technology EMV3.1 User Manual

Self-monitoring blood glucose system

Table of Contents

Understanding Control Solution Test Results

The label on your test strip bottle shows the acceptable ranges for the Control Solutions. The result you get

should be inside the acceptable range for the appropriate control solution level. Make sure you compare the

result to the correct level of control.

When the control solution result is inside the range on the test strip bottle, your test strips and your meter are

working properly.

If your control solution result is not inside the acceptable range (printed on your test strip bottle), here are

some things you can do to solve the problem:

Note:

If you don't set "CS" mode, control solution values will be included in the memory and averages.

Setting the meter in control solution mode will prevent the control solution reading from being

added to your memory and averages.

Table of Contents

Do you have a question about the EMV3.1 and is the answer not in the manual?