Running A Control Solution Test - EPS Bio Technology EasyMax Voice III Quick Reference Manual

Running A Control Solution Test

You need the meter, a test strip, and control solution.
1. Put a test strip into the
meter in the direction of
the arrow.
2. The meter turns on.
Press M button or C button to select CS,
press power button to confirm the control
solution mode.
( means control solution mode,
mans before meal mode and
after meal.)
Place the meter on a flat
3.
surface, like a table.
Remove the control solution
4.
bottle cap and wipe the tip of
the bottle with a tissue.
Squeeze the bottle until a tiny
5.
drop forms at the tip of the
bottle.
means
5