EPS Bio Technology EMV3.1 User Manual page 24

6. Touch the drop on the bottle
8. Do not remove the test strip yet.
to cap the tip of the test
Check if the reading falls within the
strip.
range printed on the test strip bottle.
7. The meter starts to count
9. Press power button to repeat the test
down from 5 seconds and
result. Or you can also press C
then will display result.
button or M button to set the volume
before repeating the result.
Note: Be aware that there are Level 2 and Level 3 ranges listed on your test strip bottle. The Level
2 and Level 3 refer to the two different control solutions that are available. Please be sure
that you are looking at the correct range.
10. After you have compared
the reading to the range
printed on the test strip
bottle, remove the test strip
and follow your healthcare
provider's recommendation
for disposal of used glucose
test strips to throw it away.
11. Please check if the result on
the display is the same as
audible result.
24