Table of Contents
Advertisement
LAN
WAN
WAN
LAN 1
LAN 2
LAN
LAN 3
LAN 4
Rear Panel
Ports and buttons
Antenna
Install the external antenna here.
To enable the WPS function via web configuration (Go to
Wireless Settings> WPS), then press the physical WPS button
WPS
on the Wireless Router once, then the LED will start to flash.
Please make a connection with other WPS supported device
within 2 minutes.
Use standard LAN cables (RJ45 connectors) to connect your PCs
to this port. If required, any port can be connected to another hub.
LAN 1-4
Any LAN port will automatically function as an "Uplink" port when
necessary.
Connect the ADSL or Cable Modem here with RJ45 cable. If your
WAN
modem came with a cable, use the supplied cable, otherwise, use
a standard LAN cable (RJ45 connectors).
POWER
Connect the supplied power adapter here.
ON
Blinking
ON
Green
OFF
Blinking
OFF
Green
ON
Blinking
WLAN link / active
WLAN traffic transmitting
WAN link / active
WAN function off
WAN traffic transmitting
LAN function off
LAN link / active
LAN traffic transmitting
2
Advertisement
Table of Contents
