Reboot; Figure 482 Maintenance > Reboot - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

C
H A P T E R
Use this to restart the device (for example, if the device begins behaving erratically). See also
Section 1.4 on page 55
If you applied changes in the Web configurator, these were saved automatically and do not
change when you reboot. If you made changes in the CLI, however, you have to use the
command to save the configuration before you reboot. Otherwise, the changes are lost
write
when you reboot.
Reboot is different to reset; (see
default configuration.
The Reboot screen is part of the Web configurator so that remote users can restart the device.
To access this screen, click Maintenance > Reboot.
Figure 482 Maintenance > Reboot
Click the Reboot button to restart the device. Wait a few minutes until the login screen
appears. If the login screen does not appear, type the IP address of the device in your Web
browser.
You can also use the CLI command
ZyWALL USG 300 User's Guide
for information on different ways to start and stop the ZyWALL.
Section 50.2 on page
to restart the device.

reboot

49
Reboot
652) reset returns the device to its
649