Figure 450 Ssh Example 2: Log In; Figure 451 System > Telnet; Configuring Telnet - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 44 Service Control
2 Enter "ssh –1 192.168.1.1". This command forces your computer to connect to
the ZyWALL using SSH version 1. If this is the first time you are connecting to the
ZyWALL using SSH, a message displays prompting you to save the host information of
the ZyWALL. Type "yes" and press [ENTER].
Then enter the password to log in to the ZyWALL.

Figure 450 SSH Example 2: Log in

$ ssh –1 192.168.1.1
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.
Administrator@192.168.1.1's password:
3 The CLI screen displays next.
44.8 Telnet
You can use Telnet to access the ZyWALL's command line interface. Specify which zones
allow Telnet access and from which IP address the access can come.

44.8.1 Configuring Telnet

Click System > TELNET to configure your ZyWALL for remote Telnet access. Use this
screen to specify from which zones Telnet can be used to manage the ZyWALL. You can also
specify from which IP addresses the access can come.
Figure 451 System > Telnet
604
ZyWALL USG 300 User's Guide