Figure 136 Network > Interface > Bridge > Edit
In this example, you are creating a new bridge. If you are editing a bridge, the Interface Name
field is read-only. Each field is described in the table below.
Table 58 Network > Interface > Bridge > Edit
LABEL
Bridge Interface
Properties
Enable
Interface Name
Description
Member
Configuration
ZyWALL USG 300 User's Guide
DESCRIPTION
Select this to enable this interface. Clear this to disable this interface.
This field is read-only if you are editing the interface. Enter the name of the
bridge interface. The format is brx, where x is 0 - 11. For example, br0, br3, and
so on.
Enter a description of this interface. It is not used elsewhere. You can use
alphanumeric and
()+/:=?!*#@$_%-
characters long.
Chapter 10 Interface
characters, and it can be up to 60
207