Ssl Access Policy Limitations; Figure 212 Vpn > Ssl Vpn > Access Privilege; Table 101 Vpn > Ssl Vpn > Access Privilege - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 21 SSL VPN
Table 100 Objects (continued)
OBJECT TYPE
Server
Addresses
VPN Network

21.1.2 SSL Access Policy Limitations

You cannot delete an object that is used by an SSL access policy. To delete the object, you
must first unassociate the object from the SSL access policy.
21.2 SSL Access Privilege List
Click VPN > SLL VPN to open the Access Privilege screen. This screen displays a summary
of the SSL access policy(ies) you have configured.
Figure 212 VPN > SSL VPN > Access Privilege
The following table describes the labels in this screen.
Table 101 VPN > SSL VPN > Access Privilege
LABEL
#
Name
User/Group
Application
Add icon
Apply
Reset
324
OBJECT
DESCRIPTION
SCREEN
Address Configure address objects for the IP addresses of the DNS and
WINS servers that the ZyWALL sends to the VPN connection
users.
Address Configure an address object to specify which network segment
users are allowed to access through a VPN connection.
DESCRIPTION
This field displays the index number of the entry.
This field displays the descriptive name of the SSL access policy for identification
purposes.
This field displays the user account or user group name(s) associated to an SSL
access policy.
This field displays up to three names.
This field displays the descriptive name of the SSL application object this policy
uses.
This column provides icons to add, edit, and remove policies.
To add a new policy, click the Add icon at the top of the column.
To activate or disable the policy, click the Activate/Deactivate icon.
To edit a policy, click the Edit icon next to the policy.
To delete a policy, click the Remove icon next to the policy.
To rearrange a policy in the list, click the Move to N icon next to the policy.
Click Apply to save the settings.
Click Reset to discard all changes.
ZyWALL USG 300 User's Guide