Figure 69 Network > Device Ha > Vrrp Group > Add: Ge4; Figure 70 Device Ha > Synchronize; Set Up The Password For Synchronization - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 6 Tutorials
Figure 69 Network > Device HA > VRRP Group > Add: ge4
Once you configure an interface in a VRRP group, you should not configure
the interface to have a dynamic IP address.

6.3.3 Set up the Password for Synchronization

1 Click Device HA > Synchronize.
2 Type the password for synchronization in the Password field. This password does not
have to be the same as the password for the admin account, but you have to set the same
password in the master and backup. Click Apply.
Figure 70 Device HA > Synchronize
138
ZyWALL USG 300 User's Guide