Figure 348 Anti-X > Content Filter > General > Add L; Content Filter Policy Screen - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Chapter 31 Content Filter Screens
Table 146 Anti-X > Content Filter > General (continued)
LABEL
Registration Status
Registration Type
Apply new Registration
Apply
Reset

31.3 Content Filter Policy Screen

Click Anti-X > Content Filter > General > Add or Edit to open the Content Filter Policy
screen. Use this screen to configure a content filter policy. A content filter policy defines
which content filter profile should be applied, when it should be applied, and to whose web
access it should be applied.
Figure 348 Anti-X > Content Filter > General > Add l
466
DESCRIPTION
This read-only field displays the status of your content-filtering database
service registration.
Not Licensed displays if you have not successfully registered and activated
the service.
Expired displays if your subscription to the service has expired.
Licensed displays if you have successfully registered the ZyWALL and
activated the service.
After you register for content filter, you can see
how to use the Test Against Web Filtering Server button. When the
content filter is active, you should see the web page's category. The query
fails if the content filter is not active.
You can view content filter reports after you register the ZyWALL and
activate the subscription service in the Registration screen (see
on page 483).
This read-only field displays what kind of service registration you have for
the content-filtering database.
None displays if you have not successfully registered and activated the
service.
Standard displays if you have successfully registered the ZyWALL and
activated the service.
Trial displays if you have successfully registered the ZyWALL and activated
the trial service subscription.
This link appears if you have not registered for the service or only have the
trial registration. Click this link to go to the screen where you can register for
the service.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 31 on page 469
Chapter 32
ZyWALL USG 300 User's Guide
for