Figure 245 Vpn > Ipsec Vpn > Vpn Connection (Enable); Figure 246 Vpn > L2Tp Vpn Example; Configuring The L2Tp Vpn Settings Example; Configuring The Policy Route For L2Tp Example - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual
Unified security gateway
Hide thumbs
Also See for Unified Security Gateway ZyWALL 300:
- User manual (1156 pages) ,
- Quick start manual (128 pages) ,
- Specifications (4 pages)
Table of Contents
Advertisement
Chapter 26 L2TP VPN Example
Figure 245 VPN > IPSec VPN > VPN Connection (Enable)
26.4 Configuring the L2TP VPN Settings Example
1 Click VPN > L2TP VPN to open the following screen.
Figure 246 VPN > L2TP VPN Example
2 Configure the following.
• Enable the connection.
• Set it to use the Default_L2TP_VPN_Connection VPN connection.
• Configure an IP address pool for the range of 192.168.10.10 to 192.168.10.20. It is
called L2TP_POOL here.
• This example uses the default authentication method (the ZyWALL's local user data
base).
• Select a user or group of users that can use the tunnel. Here a user account named
L2TP-test has been created.
• The other fields are left to the defaults in this example, click Apply.
26.5 Configuring the Policy Route for L2TP Example
1 Click Routing > Add to open the following screen.
354
ZyWALL USG 300 User's Guide
Advertisement
Table of Contents
Troubleshooting
