Table 255 Account Logs; Table 256 Port Grouping Logs - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Table 254 Interface Logs (continued)
LOG MESSAGE
Interface %s is
disconnected.
Interface %s connect
failed: Peer not
responding.
Interface %s connect
failed: PAP
authentication
failed.
Interface %s connect
failed: Connect
timeout.
Interface %s create
failed because has no
member.

Table 255 Account Logs

LOG MESSAGE
Account %s %s has been
deleted.
Account %s %s has been
changed.
Account %s %s has been
added.

Table 256 Port Grouping Logs

LOG MESSAGE
Interface %s links up
because of changing
Port Group. Enable
DHCP client.
Interface %s links
down because of
changing Port Group.
Disable DHCP client.
Port Group on %s is
changed. Renew DHCP
client.
Port Grouping %s has
been changed.
ZyWALL USG 300 User's Guide
DESCRIPTION
A PPP or AUX interface disconnected successfully. %s: interface
name.
The interface's connection will be terminated because the server did
not send any LCP packets. %s: interface name.
PAP authentication failed (the server must support PAP and verify
verify that the authentication failed, this does not include cases where
the server does not support PAP). %s: PPP interface name.
A PPPOE connection timed out due to a lack of response from the
PPPOE server. %s: PPP interface name.
A bridge interface has no member. %s: bridge interface name.
DESCRIPTION
A user deleted an ISP account profile.
1st %s: profile type, 2nd %se: profile name.
A user changed an ISP account profile's options.
1st %s: profile type, 2nd %s: profile name.
A user added a new ISP account profile.
1st %s: profile type, 2nd %s: profile name.
DESCRIPTION
An administrator used port-grouping to assign a port to a
representative Interface and this representative interface is set to
DHCP client and only has one member. In this case the DHCP client
will be enabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is set to
DHCP client and has no members in its group. In this case the DHCP
client will be disabled. %s: interface name.
An administrator used port-grouping to assign a port to a
representative interface and this representative interface is set to
DHCP client and has more than one member in its group. In this case
the DHCP client will renew. %s: interface name.
An administrator configured port-grouping, %s: interface name.
Appendix B Log Descriptions
699