Figure 456 System > Vantage Cnm; Configuring Vantage Cnm - ZyXEL Communications Unified Security Gateway ZyWALL 300 User Manual

Table 213 System > Dial-in Mgmt (continued)
LABEL
Port Speed
Initial String
Advanced/Basic
Apply
Reset
44.13 Vantage CNM
Vantage CNM (Centralized Network Management) is a browser-based global management
solution that allows an administrator from any location to easily configure, manage, monitor
and troubleshoot ZyXEL devices located worldwide. See the Vantage CNM User's Guide for
details.
If you allow your ZyWALL to be managed by the Vantage CNM server, then you should not
do any configurations directly to the ZyWALL (using either the web configurator or
commands) without notifying the Vantage CNM administrator.

44.14 Configuring Vantage CNM

Vantage CNM is disabled on the device by default. Click System > Vantage CNM to
configure your device's Vantage CNM settings.
Figure 456 System > Vantage CNM
ZyWALL USG 300 User's Guide
DESCRIPTION
Use the drop-down list box to select the speed of the connection between the
ZyWALL's auxiliary port and the external modem. Available speeds are: 9600,
19200, 38400, 57600, or 115200 bps.
Type the AT command string that the ZyWALL returns to the external serial
modem connected to the ZyWALL's auxiliary port during connection initialization.
Note: Consult the manual of your external serial modem
connected to your ZyWALL's auxiliary port for specific AT
commands.
Click Advanced to display more configuration fields and edit the details of your
dial-in management setup.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Chapter 44 Service Control
611