Resetting The Global Parameters; Appendix C: Exporting And Importing Programs/Banks - Sequential prophet 5 User Manual

Resetting the Global Parameters

If you're trying to track down a problem, it's sometimes a good idea to
reset the Global parameters to their defaults. This is a quick way to make
sure that the Prophet-5 returns to its factory settings.
This will not erase any User programs.
To reset all Global parameters to their default settings:
1. Hold down the
2. Press the
3. You can now can play the Prophet-5 again.
Appendix C: Exporting and Im-
porting Programs/Banks
You can use the
current program, the current bank, the current group, all user banks, or
all banks (both user and factory) in SysEx format via the selected MIDI
port.
This allows you to save your programs so that you can share them or
archive them. Dumped programs will load back into the same bank and
program location in memory when received by the Prophet-5 via MIDI.
Make sure that your MIDI Editor or Librarian application of choice is open
and ready for data transfer and that you have made the necessary MIDI/USB
connections between the Prophet-5 and your computer.
To export a Program, Bank, Group, or all Banks as a SysEx file over
MIDI:
1. Press the
then press
2. Use the
group select
MIDI port — MIDI (MID) or USB (usb).
62

Appendix C: Exporting and Importing Programs/Banks

button.
record
button. Global parameters are reset.
globals
command in the
pgm dump
button once (this enables the upper set of parameters)
globals
program selector
and
bank select
section
globals
the
6 to select
midi sysex
buttons to select the appropriate
to transmit the
command.
Sequential