The Tune Button
The
button runs an auto-calibration procedure on the Prophet-5,
tune
tuning its oscillators, filters, and other components. Use this calibration
procedure as needed over the first few days of use. The Prophet-5 learns
the range of temperatures at your location and will keep itself in tune
over this range.
Later, if you use the Prophet-5 in a different environment that is measur-
ably warmer or cooler (on stage, in an air-conditioned studio, and so on)
run the calibration procedure again.
Please be aware that it's possible for the Prophet-5's oscillators and filter
to be in tune with themselves but for the synthesizer to not be tuned to
concert pitch. Master tuning of the synth is controlled by the
knob. See page 42 for details.
tune
To calibrate the oscillators and filters:
1. Press the
2. The program
numeric display indicates the tuning sequence while the Prophet-5
performs its auto-calibration procedure. Don't turn off the power while
it's doing this.
3. When finished, the front panel controls return to normal and you can
play the Prophet-5.
44
The Tune Button
button.
tune
select button
LEDs begin flashing in sequence and the
master
Sequential
Need help?
Do you have a question about the prophet 5 and is the answer not in the manual?