Globals - Top Row - Sequential prophet 5 User Manual

Use the Group and Bank buttons to increment and decrement through the Global settings
To set a Global parameter:
1. Press the
parameters. Pressing it a second time enables the lower set of param-
eters.
2. Press the program selector button (1 - 8) that corresponds to the desired
parameter. The parameters are printed above each switch.
3. Use the
step through available settings.
4. Once you've chosen the desired setting, press the
to exit.

Globals - Top Row

1. Transpose: -12...12—
in semitones up to one octave up (+12) or down (-12).
2. MIDI Channel: ALL, 1...16—
receive data, 1 to 16.
3. Param Xmit: Off, CC, NRn—
controls are transmitted via MIDI as Continuous Controllers (CC) or
Non-registered Parameter Number (NRn). Transmission of parameters
can also be turned off. You could, for example, turn the filter
frequency knob on the Prophet-5 and have it affect the cutoff frequency
of another synthesizer. For a list of Prophet-5 CCs and NRPNs, see the
Support page for the Prophet-5 on the Sequential website.
NRPNs are the preferred method of parameter transmission, since they cover
the complete range of all parameters, while CCs are limited to a range of 128. For a
list of Prophet-5 CCs and NRPNs, see the Prophet-5 Support page at Sequential.com.
Prophet-5 User's Guide
button. Pressing it once activates the upper set of
globals
and buttons as decrement and increment buttons to
group bank
Master Transpose control, 0 is centered. Steps
receives on all 16 channels.
all
Selects which MIDI channel to send and
Changes to the values of front panel
button again
globals
cutoff
Global Settings 13