Sequential prophet 5 User Manual page 60

6. The Filter Envelope's
Amplifier Envelope. In other words, you can't hear a long release on
the filter envelope if the amplifier envelope is short! So to hear the filter
envelope's
release
7. Now repeatedly strike a note on the keyboard as you turn the Filter
Envelope's
the note fades out faster or slower as you change the
How to make the synth bass fatter:
• Turn on the square wave in Oscillator A.
• Turn up Oscillator B in the mixer, then turn on the sawtooth wave and
use the
fine
• Turn on
button and repeatedly pressing the
unison
says 5.
• Detune the stacked unison voices by holding down the
and press one of the
Now you know how to create a simple synth bass program using the
most essential synthesizer components of the Prophet-5: the oscillators,
the filters, and the envelopes. Using just these three things you can create
an enormous variety of sounds. Keep experimenting with them and if
you like what you've created, save the programs in one of the user banks.
(See "Saving a Program" on page 9.)
Prophet-5 User's Guide
release
parameter in action, first set the Amp Envelope's
release
value to 7.
knob clockwise and counterclockwise. Notice how
release
control to slightly detune oscillator B.
then increase voice stacking by holding down the
unison
program select
parameter acts in conjunction with the
bank select
buttons (maximum detuning is 8).
value.
release
button until it
button
unison
Synth Bass 49