Glide Rate - Sequential prophet 5 User Manual

In the case of Filter aftertouch, pressing a key harder will open the filter
wider, increasing the brightness of the sound. In the case of LFO modula-
tion, pressing a key harder will apply modulation to the currently enabled
destinations in the
To enable aftertouch (pressure) as a source for modulation:
1. Press the
2. Press the
3. Press the
and LFO modulation.
4. Hold down a note on the keyboard, then press harder. Modulation is
applied to the selected destination(s).
The Prophet-5 provides eight different aftertouch/pressure response settings.
To choose a different response curve, use the
parameters. See page 16 for more information.

Glide Rate

Glide causes the pitch of a note to glide up or down from the pitch of
the previously played note. On the Prophet-5, glide operates on a given
voice whenever that voice changes to a different note. It functions when the
Prophet-5 is in either polyphonic or Unison mode.
To use Glide:
1. Turn the
2. Play a series of notes up and down the keyboard while you continue to
turn the
Prophet-5 User's Guide
- section.
wheel mod
switch once to select Filter modulation.
aftertouch
switch twice to select LFO modulation.
aftertouch
switch three times to select both Filter modulation
aftertouch
knob to approximately 4.
glide rate
knob to adjust the amount of glide.
glide rate
parameter in the
at response globals
Glide Rate 39