You can control how much the source affects the destination by dialing in
a specific modulation amount with the
Use Poly Mod to create complex harmonic effects ranging from FM
(frequency modulation) to audio-rate filter modulation and beyond. Many
classic sounds on the original Prophet-5 were created through clever use
of Poly Mod.
Poly Mod Parameters
Selects the amount of modulation from the Filter Envelope
Filter Env:
that is applied to a selected destination.
Selects the amount of modulation from Oscillator B that is
Osc B:
applied to a selected destination.
When using
affected by the waveshape currently chosen for Oscillator B (triangle, sawtooth, or
square/pulse). Try setting Oscillator B to low frequency (using the
further increase modulation possibilities.
Selects Oscillator A frequency as a modulation destination.
Freq A:
Choose o
as a modulation source to produce FM (frequency modu-
b
sc
lation) effects with their characteristic complex harmonics and metallic
timbre.
When Oscillator A is set to square wave, choosing this as a desti-
PW A:
nation modulates its pulse width. This will animate the timbre of Oscillator
A in interesting ways.
Selects the Filter cutoff frequency as a modulation destination.
Filter:
Prophet-5 User's Guide
as a modulation source, the modulation character is
b
osc
or
filter env
osc b
knobs.
switch) to
lo freq
Poly Mod
35
Need help?
Do you have a question about the prophet 5 and is the answer not in the manual?