Sound Banks; Selecting Programs - Sequential prophet 5 User Manual

Sound Banks

The Prophet-5 contains a total of 400 programs. 200 are permanent
"Factory" programs and 200 are "User" programs that can be over-
written. You can edit the programs of either set, but you can only save
sounds to the User set.
When the
factory
active. When the
As shipped from the factory, both sound sets are identical.
Group, Bank, and Program Number selectors

Selecting Programs

Use the ,
group bank
programs.
To choose a program:
1. Press the
program. Each time you press the button, the number increments and
cycles through Groups 1-5.
2. Press the
Each time you press the button, the number increments and cycles
through Banks 1-5.
3. Press the a
the program.
To choose program 123, for example:
1. Press the
1.
2. Press the
3. Press
program selector
6 Setting Up the Prophet-5
switch is enabled, the permanent Factory sound set is
switch is disabled, the User sound set is active.
factory
, and
program selector
button to specify the "hundreds" bank of the
group select
button to specify the "tens" bank of the program.
bank select
program selector
button as many times as needed to cycle around to
group select
button as many times as need to cycle around to 2.
bank select
button 3.
buttons to select and recall
button (1-8) to specify the "ones" digit of
Sequential