Mod Wheel; Adding Aftertouch - Sequential prophet 5 User Manual

Mod Wheel

The Mod wheel controls the amount of modulation from the LFO and/or the
Noise source as set in the
modulation in real time by moving the wheel as you play. It's a great way to
add expressiveness to a sound or performance by using it to control vibrato,
filter effects, and more.
To choose a modulation destination for the Mod wheel:
1. In the
wheel
the LFO/Noise source. The
multiple destinations simultaneously.
2. Using the
Mod wheel.
3. For LFO modulation, set the
4. To apply modulation only when you use the Mod wheel, set the
amount
5. Hold down a note on the keyboard and turn the Mod wheel.

Adding Aftertouch

Aftertouch is a performance feature that allows you to add modulation to
a sound by applying additional pressure to a key after the key is already
down. The greater the pressure applied, the more modulation is applied.
The Prophet-5 provides monophonic (or "channel") aftertouch, which
means that applying pressure to any key within a chord will apply modu-
lation to all notes currently held.
The
aftertouch
cutoff and/or the LFO amount.
38 Adding Aftertouch
-
wheel mod
- section, select the destination(s) for modulation from
mod
knob, set the source of modulation applied by the
source mix
to 0.
switch lets you choose to apply aftertouch to the Filter
section. This allows you to perform
switches allow you to activate
destination
and
shape frequency
.
initial
Sequential