The Configuration Screen; Figure 29 Access Point Mode: Link Info; Table 15 Access Point Mode: Link Info - ZyXEL Communications ZyXEL ZyWALL 1 User Manual

ZyXEL G-220 v2 User's Guide

Figure 29 Access Point Mode: Link Info

The following table describes the labels in this screen.

Table 15 Access Point Mode: Link Info

LABEL
Status
SSID
Current Channel
Transmission Rate This field displays the current transmission rate of the ZyXEL G-220 v2 in megabits
Security
MAC
Output Power
Association List
MAC Address
Refresh

4.3 The Configuration Screen

Click Configuration in the ZyXEL Utility screen to display the screen as shown.
54
DESCRIPTION
This field displays the name that identifies your ZyXEL G-220 v2 in the wireless
LAN network.
This field displays the radio channel the ZyXEL G-220 v2 is currently using.
per second (Mbps).
This field shows whether data encryption is activated (WEP) or inactive (Disable).
This field displays the MAC address of the ZyXEL G-220 v2.
This field shows the strength of the ZyXEL G-220 v2's antenna gain or
transmission power.
This table lists up to 16 wireless clients that are currently connected to the ZyXEL
G-220 v2.
denotes a wireless client without WEP security.
denotes a wireless client with WEP security enabled.
This field displays the MAC addresses of a wireless client that is currently
connected to the ZyXEL G-220 v2.
Click Refresh to update this screen.
Chapter 4 Access Point Mode Configuration