Trend Chart; Table 3 Station Mode: Link Info - ZyXEL Communications ZyXEL ZyWALL 1 User Manual

ZyXEL G-220 v2 User's Guide
The following table describes the labels in this screen.

Table 3 Station Mode: Link Info

LABEL
AP Mode
Station Mode
Wireless Network
Status
Profile Name
Network Name
(SSID)
AP MAC Address
Network Type
Transmission Rate This field displays the current transmission rate of the ZyXEL G-220 v2 in megabits
Security
Channel
Status
Statistics
Transmit Rate
Receive Rate
Authentication
Wireless Mode
Total Transmit
Total Receive
Signal Strength

Trend Chart

Signal Strength
Link Quality
3.2.1 Trend Chart
Click Trend Chart in the Link Info screen to display a screen as shown below. Use this
screen to view real-time data traffic statistics.
36
DESCRIPTION
Use the radio button to set the ZyXEL G-220 v2 to operate in wireless station or
access point mode. Refer to
This is the name of the profile you are currently using.
The SSID identifies the Service Set to which a wireless station is associated. This
field displays the name of the wireless device to which the ZyXEL G-220 v2 is
associated.
This field displays the MAC address of the wireless device to which the ZyXEL G-
220 v2 is associated.
This field displays the network type (Infrastructure(BSS) or Ad Hoc) of the
wireless network.
per second (Mbps).
This field displays whether data encryption is activated (WEP (WEP or 802.1x),
TKIP (WPA/WPA-PSK/WPA2/WPA2-PSK), AES (WPA/WPA-PSK/WPA2/WPA2-
PSK)) or inactive (DISABLE).
This field displays the radio channel the ZyXEL G-220 v2 is currently using.
This field displays the authentication type of the wireless network.
This field displays the current data transmission rate in kilobits per second (Kbps).
This field displays the current data receiving rate in kilobits per second (Kbps).
This field displays the authentication method of the ZyXEL G-220 v2.
This field displays the wireless standard (B or G) of the wireless device.
This field displays the total number of data frames transmitted.
This field displays the total number of data frames received.
This field displays the signal strength of the ZyXEL G-220 v2.
Click this button to display the real-time statistics of the data rate in kilobits per
second (Kbps).
The status bar shows the strength of the signal.
The status bar shows the quality of the signal.
Section 1.7.1 on page 25 for more information.
Chapter 3 Wireless Station Mode Configuration