The following table describes the labels in this screen.
Table 7 Station Mode: Security Settings: WPA-PSK/WPA2-PSK
LABEL
Encryption Type
Pre-Shared Key
Back
Next
Exit
3.3.2.3 WPA/WPA2
Figure 18 Station Mode: Security Settings: WPA/WPA2
The following table describes the labels in this screen.
Table 8 Station Mode: Security Settings: WPA/WPA2
LABEL
Encryption Type
Authentication
Type
Login Name
Chapter 3 Wireless Station Mode Configuration
DESCRIPTION
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Section 2.2.3 on page 29
Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal
characters.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to
Section 3.3.3 on page
Click Exit to return to the Site Survey screen without saving.
DESCRIPTION
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Section 2.2.3 on page 29
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
ZyXEL G-220 v2 User's Guide
for more information.
43.
for more information.
41