Figure 58 Windows Xp: Wireless (Network) Properties: Authentication; Table 28 Windows Xp: Wireless (Network) Properties: Authentication - ZyXEL Communications ZyXEL ZyWALL 1 User Manual

Table 27 Windows XP: Wireless (network) properties: Association (continued)
LABEL
This is a
computer-to-
computer (ad hoc)
network; wireless
access points are
not used
OK
Cancel
Authentication
Click the Authentication tab in the Wireless (network) properties screen to display the
screen shown next. The fields on this screen are grayed out when the network is in Ad-Hoc
mode or data encryption is disabled.

Figure 58 Windows XP: Wireless (network) properties: Authentication

The following table describes the labels in this screen.

Table 28 Windows XP: Wireless (network) properties: Authentication

LABEL
Enable IEEE
802.1x
authentication for
this network
EAP Type
Properties
Appendix D Management with Wireless Zero Configuration
DESCRIPTION
If this check box is selected, you are connecting to another computer directly.
Click OK to save your changes.
Click Cancel to leave this screen without saving any changes you may have made.
DESCRIPTION
This field displays whether the IEEE 802.1x authentication is active.
If the network authentication is set to Open in the previous screen, you can choose
to disable or enable this feature.
Select the type of EAP authentication. Options are Protected EAP (PEAP) and
Smart Card or other Certificate.
Click this button to open the properties screen and configure certificates. The
screen varies depending on what you select in the EAP type field.
ZyXEL G-220 v2 User's Guide
83