Security Settings - ZyXEL Communications NWD2705 User Manual

Chapter 4 ZyXEL Utility: Station Mode

4.4.1 Security Settings

When you configure the NWD2705 to connect to a network with wireless security activated and the
security settings are disabled on the NWD2705, the screen varies according to the encryption
method used by the selected network.
4.4.1.1 Security Type Selection
When you choose to connect to a network that has security, you are presented with a security
selection screen. Choose the security of the network you are attempting to join.
Figure 28 Security Setting Selection
The following table describes the labels in this screen.
Table 8 Security Setting: WEP
LABEL
Security Type
Back
Next
Exit
40
DESCRIPTION
Select the security type that matches the security setting of the network you're trying to
join.
The options are: DISABLE, WEP, WPA-PSK, and WPA2-PSK.
Click Back to go to the Site Survey screen to select and connect to another network.
Click Next to confirm your selections and advance to the Security Settings screen that
corresponds to the one you select here.
Click Exit to return to the Site Survey screen without saving.
NWD2705 User's Guide