ZyXEL G-302 v3 User's Guide
1.1.2.1 Infrastructure
To connect to a network via an Access Point (AP), set the G-302 v3 network type to
Infrastructure. Through the AP, you can access the Internet or the wired network behind the
AP.
Figure 1 Application: Infrastructure
1.1.2.2 Ad-Hoc
In case you prefer to set up a small independent wireless workgroup without an AP, use the
Ad-Hoc mode.
Ad-hoc mode does not require an AP or a wired network. Two or more wireless clients
communicate directly to each other.
22
Chapter 1 Getting Started