Storage; Troubleshooting - Silvercrest SED 3.7 G3 Operating Instructions Manual

Storage

■ Always protect the epilator head
protective cap
■ Store the appliance, the cleaning brush
power adapter
■ Store the appliance at a dry and dustfree location.

Troubleshooting

Problem
The appliance
does not function.
The appliance
only runs slowly.
The plucking of
the hairs is very
painful.
Not all hairs are
plucked.
│ GB │ IE │ NI │ CY
■ 16
.
in the storage pouch
Cause
The battery is
drained.
The appliance is de-
fective.
The battery is
drained.
The hairs may be
too long.
It is possible that the
hairs are too short.
You are working
too fast.
with the supplied
and the mains
.
Solution
Recharge the appliance.
In this case, contact
Customer Services.
Recharge the appliance.
Shorten the hairs to about
0.3 – 0.5 cm. See also the
section "Tips and Tricks".
The hairs should have a
length of 0.3 – 0.5 cm.
Move the appliance more
slowly over your skin.
SED 3.7 G3