Silvercrest SED 3.7 G3 Operating Instructions Manual page 17

7) When you are finished with the treatment, place the speed
switch to "0".
8) Clean the epilator head
"Cleaning and Care".
9) If necessary, remove the massage roller attachment
the protective cap
NOTICE
► Stop using the epilator head
To order a new epilator head
Department (see section "Ordering replacement parts").
To replace the epilator head
― Press the two restraint fixtures
time pull the epilator head
― Press the new epilator head
The epilator head
│ GB │ IE │ NI │ CY
■ 14
as described in the section
on the epilator head
immediately if it is damaged!
, please contact the Service
, please proceed as follows:
upwards.
onto the appliance.
must click into place.
.
together, and at the same
SED 3.7 G3
and place