Storage - Silvercrest SED 3.7 G3 Operating Instructions Manual

To thoroughly clean the epilator head 2 you can remove it
■
from the appliance:
Press the two restraint fixtures 3 together and at the same
―
time pull the epilator head 2 upwards.
Clean the epilator head 2 under running water and then allow
―
it to dry.
Place the epilator head 2 back onto the appliance. The epila-
―
tor head 2 must audibly engage.
Clean the appliance housing and the mains power adapter 0
■
with a moist cloth. If required, use some mild detergent on the
cloth. Ensure that the appliance is completely dry before the
next use.

Storage

Always protect the epilator head 2 with the supplied
■
protective cap 1.
Store the appliance, the cleaning brush w and the mains
■
power adapter 0 in the storage pouch q.
■ Store the appliance at a dry and dustfree location.
SED 3.7 G3
GB │ IE │
15 ■