Table of Contents
Advertisement
Click the index number 1 to edit the default administrator account settings.
Figure 15 User Account
Enter the new password in the Password and Retype Password to confirm
fields, and click Modify. Do not forget to click Config Save before you exit the
web configurator. See
4.6 Saving Your Configuration
Click Apply in a configuration screen when you are done modifying the settings in
that screen to save your changes back to the run-time memory. Settings in the
run-time memory are lost when the SAM1316-22's power is turned off.
Click Config Save in the navigation panel to save your configuration to
nonvolatile memory. Nonvolatile memory refers to the SAM1316-22's storage that
remains even if the SAM1316-22's power is turned off.
Note: Use Config Save when you are done with a configuration session.
4.7 Logging Out of the Web Configurator
Click Logout in any screen to exit the web configurator. You have to log in with
your password again after you log out. This is recommended after you finish a
SAM1316-22 User's Guide
Chapter 4 Introducing the Web Configurator
Section 4.6 on page
51.
51
- Quick Links:
- Ip Setup
- Xdsl Port Setup
Hide quick links:
Advertisement
Table of Contents
