Wiring The Power Supply - Omron F150-2 Setup Manual

Overview of F150-2 Application
2-4-3

Wiring the Power Supply

! Caution
Use a DC power supply with safe extra low-voltage circuits on
the secondary side.
Use a power supply with the following specifications. We recom-
mend using OMRON's S82K-01524 Power Supply.
Use a power supply that meets the following specifications when
connecting an F150 and an F150-M05L LCD Monitor to a single
power supply. We recommend using OMRON's S82K-05024
Power Supply.
24 VDC
Note
14
Item
Output current
Power supply voltage
Item
Output current
Power supply voltage
1. Wire the Power Supply Unit independently of other devices.
In particular, keep the power supply wired separately from
inductive loads.
2. Keep the power supply cable as short as possible (less than
10 m).
3. If UL recognition is required, use a UL class II power supply.
Specification
0.6 A min.
+10%
24 VDC /
-15%
Specification
1.6 A min.
+10%
24 VDC /
-15%
Section 2-4