Table of Contents
Advertisement
CCTV Lens
A POWER Indicator
Lit while power is ON.
B RUN Indicator
Lit in RUN mode.
C ERROR Indicator
Lit when an error occurs.
D RS-232C Connector
Connects the F150 to a computer,
Programmable Controller, or other
external device.
E Camera Connector
Connects to the Camera.
F Power Supply Terminals
Wired to the power supply.
G Ground Terminal
Wired to the ground.
H Input Terminals
Wired to external devices, such as
synchronous sensors or inputs
from a Programmable Controller.
I Output Terminals
Wired to external devices, such as
synchronous sensors or outputs to
a Programmable Controller.
J Monitor Connector
Connects to the video monitor.
K Console Connector
Connects to the Console.
L MS (Module Status) Indicator
Indicates the status of the F150 in
CompoBus/D communications. Lit
in green when the F150 is operat-
ing normally.
M NS (Network Status) Indicator
Indicates the status of the network
in CompoBus/D communications.
Lit in green when the network is op-
erating normally.
N DIP Switch
Used to set the node address and
baud rate.
O CompoBus/D Connector
Connects
the
cable of the CompoBus/D network.
Section
2-2
communications
11
Advertisement
Chapters
Table of Contents
