dehn DEHNcare APS Series User Information page 16

Table of Contents

Available languages

Cleaning:

Cleaning and care prior to initial use and before and after each use

Basically, face shields have to be treated with care.

Soiled face shields should be cleaned before and after each use using a lint-free, damp cloth (warm tap water). If heavily soiled,

mild soap may be used. Commercially available solvents or organic compounds are not allowed as they might weaken the surface

and reduce material tension.

Safety helmets and face shields may only be used in a clean and dry state.

DEHNcare APS... face shields feature a permanent premium anti-mist coating. If you should nevertheless notice misting of the face

shield, this is due to dirt which should be removed as described above.

Transport and storage:

Face shields must be transported and stored in such a way that their performance characteristics are not diminished.

Face shields should be transported in the storage bag provided for the purpose.

The equipment should be stored in closed rooms or vehicles in a suitable container.

Storage temperature: +5°C to +30°C

No direct sun light or heat source

Avoid compression

Protection against UV radiation:

Some plastics are sensitive to UV radiation. For this reason, the equipment should not be exposed to direct sunlight for longer than is

necessary.

Maintenance, repair and replacement:

If the face shield will not remain in the open position, the pivot screws at the sides must be tightened.

The face shield (including the fixed chin protector) must be replaced if it

is scratched or damaged

has been exposed to an arc fault

has been exposed to chemicals, oils or lubricants*

has been damaged by mechanical impact*

reached its normal life span (5 years)

has been exposed to high temperatures or overexposed to sunlight*

has been exposed to fire for a longer period of time*

*Attention:

Damage resulting from the above-mentioned causes may not be visible to the user.

DISPOSAL:

The products described in this user information and their packaging must be disposed of as plastic waste at the end of their life span.

Retain this user information for future reference!

Table of Contents