Chapter 9 Logs; Viewing Logs; Figure 33 View Log; Table 22 View Log - ZyXEL Communications Prestige P-2002 Series User Manual

This chapter contains information about the Prestige's Logs screen. Refer to the Appendices
for example log message explanations.

9.1 Viewing Logs

The web configurator allows you to look at all of the Prestige's logs in one location.
Click LOGS in the navigation panel to open the View Log screen. Use the View Log screen to
display the Prestige's logs.
Log entries in red indicate system error logs. Once the log table is full, old logs are deleted as
new logs are created. Click a column heading to sort the entries. A triangle indicates ascending
or descending sort order.

Figure 33 View Log

The following table describes the labels in this screen.

Table 22 View Log

LABEL
Display
Refresh
Clear Log
Time
Message
Source

Chapter 9 Logs

DESCRIPTION
Select All Logs to view all of the Prestige's logs.
Select System Maintenance to view the Prestige's maintenance logs.
Select System Error to view the Prestige's error logs.
Select SIP to view Session Initiation Protocol logs.
Select RTP to view Real time Transport Protocol logs.
Select FSM to view Finite State Machine logs. These logs record phone actions.
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
This field displays the time the log was recorded. To configure the Prestige's time
and date, see Chapter 3 on page
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet.
P-2002 Series User's Guide
C
H A P T E R
35.
9
Logs
81