Log Message Descriptions; Table 23 System Error Logs; Table 24 System Maintenance Logs - ZyXEL Communications Prestige P-2002 Series User Manual

P-2002 Series User's Guide
Table 22 View Log (continued)
LABEL
Destination
Note

9.2 Log Message Descriptions

The following tables provide descriptions of example log messages.

Table 23 System Error Logs

LOG MESSAGE
WAN connection is down.

Table 24 System Maintenance Logs

LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP: %s
DHCP client IP expired
Successful WEB login
WEB login failed
Successful FTP login
FTP login failed
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
Connect to Daytime server
fail
Connect to Time server fail
Connect to NTP server fail
82
DESCRIPTION
This field lists the destination IP address and the port number of the incoming
packet.
This field displays additional information about the log entry.
DESCRIPTION
A WAN connection is down. You cannot access the network
through this interface.
DESCRIPTION
The device has adjusted its time based on information from
the time server.
The device failed to get information from the time server.
A WAN interface got a new IP address from the DHCP,
PPPoE, PPTP or dial-up server.
A DHCP client's IP address has expired.
Someone has logged on to the device's web configurator
interface.
Someone has failed to log on to the device's web configurator
interface.
Someone has logged on to the device via ftp.
Someone has failed to log on to the device via ftp.
The device got the time and date from the Daytime server.
The device got the time and date from the time server.
The device got the time and date from the NTP server.
The device was not able to connect to the Daytime server.
The device was not able to connect to the Time server.
The device was not able to connect to the NTP server.
Chapter 9 Logs