Figure 12 Ethernet; Table 8 Ethernet - ZyXEL Communications Prestige P-2002 Series User Manual

Figure 12 ETHERNET

Table 8 ETHERNET

LABEL
Get IP Address Automatically Select this option if you have a dynamic IP address.
Use Fixed IP Address
IP Address
Subnet Mask
Default Gateway
Primary/Secondary DNS
Use PPPoE Client
PPPoE User Name
Password
Apply
Reset
Chapter 4 Ethernet Screens
DESCRIPTION
Select this option if the ISP assigned you a static IP address.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP (if given).
Enter the gateway IP address assigned to you by your ISP (if given).
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. The DNS servers are
extremely important because without them, you must know the IP
address of a computer before you can access it. Specify the DNS
servers.
Select Use PPPoE Client if your ISP provides a PPPoE user name
and password.
Enter the user name exactly as your ISP assigned it (maximum 72
characters).
Enter the password exactly as your ISP assigned it.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
P-2002 Series User's Guide
43