Nat Example; Nat Types; Figure 17 Nat: Outgoing; Figure 18 Nat: Incoming - ZyXEL Communications Prestige P-2002 Series User Manual

Voip analog telephone adaptor
Hide thumbs Also See for Prestige P-2002 Series:
Table of Contents

Advertisement

NAT may be implemented on a device that is between your Prestige and the Internet.

5.3.1 NAT Example

See the following figure. The Prestige (X) sends packets to the Internet. The Prestige's IP
address is 10.0.0.3. This is a private or internal IP address. The NAT router maps the private
source IP address to a public source IP address (a.b.c.d). The public source IP address is also
known as the external IP address.
Note: The NAT figures in this chapter use lower-case letters (like a.b.c.d for example)
to represent public IP addresses.

Figure 17 NAT: Outgoing

When the NAT router receives packets with destination address IP address a.b.c.d, the NAT
router changes a.b.c.d back to the private IP address 10.0.0.3 and sends it to the Prestige.

Figure 18 NAT: Incoming

5.3.2 NAT Types

This section discusses the following NAT types that may be implemented on a router in front
of the Prestige.
• Full Cone
• Restricted Cone
• Port Restricted Cone
• Symmetric
Chapter 5 Introduction to VoIP
P-2002 Series User's Guide
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-2002lZyxel prestige 2002

Table of Contents