P-2002 Series User's Guide
Figure 28 Phone Port
The following table describes the labels in this screen.
Table 15 Phone Port
LABEL
Phone Port Settings
Speaking Volume
Listening Volume
Outgoing Call use
G.168 Active
VAD Support
Dialing Interval
68
DESCRIPTION
Use this field to select the phone port that you want to configure.
Use this field to set the loudness that the Prestige uses for the speech signal that
it sends to the peer device. -1 is the quietest and 1 is the loudest.
Use this field to set the loudness that the Prestige uses for the speech signal that
it receives from the peer device and sends to your phone. -1 is the quietest and
1 is the loudest.
SIP 1 and SIP 2 correspond to the Prestige's SIP accounts. Select whether you
want the phone(s) attached to this phone port to use SIP account 1, 2 or both
when you make a call. If you select both SIP accounts, the Prestige will first try
to use SIP account 2 and then SIP account 1 when you make a call.
Select this check box to cancel the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Select this check box to use Voice Activity Detection (VAD).
VAD reduces the bandwidth that a call uses by not transmitting when you are not
speaking.
When you are dialing a telephone number the Prestige waits this long after you
stop pressing the buttons before initiating the call. Select how many seconds
you want the Prestige to wait after the last input on the telephone's keypad
before dialing (making) a call.
Chapter 7 Phone