Chapter 3 System Screens; System Overview; General Setup; Domain Name - ZyXEL Communications Prestige P-2002 Series User Manual

This chapter provides information on the System screens.

3.1 System Overview

This chapter describes the SYSTEM screens.

3.2 General Setup

General Setup contains administrative and system-related information. System Name is for
identification purposes. However, because some ISPs check this name you should enter your
computer's "Computer Name".
• In Windows 95/98 click Start, Settings, Control Panel, Network. Click the
Identification tab, note the entry for the Computer Name field and enter it as the
System Name.
• In Windows 2000, click Start, Settings and Control Panel and then double-click
System. Click the Network Identification tab and then the Properties button. Note the
entry for the Computer name field and enter it as the System Name.
• In Windows XP, click Start, My Computer, View system information and then click
the Computer Name tab. Note the entry in the Full computer name field and enter it as
the Prestige System Name.

3.2.1 Domain Name

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave
this blank, the domain name obtained by DHCP from the ISP is used. While you must enter
the host name (System Name) on each individual computer, the domain name can be assigned
from the Prestige via DHCP.

3.3 General Setup Configuration

Click SYSTEM in the navigation panel and then General Setup to display the following
screen.

Chapter 3 System Screens

C
H A P T E R
System Screens
P-2002 Series User's Guide
3
35