Figure 64 Macintosh Os X: Apple Menu; Macintosh Os X - ZyXEL Communications Prestige P-2002 Series User Manual

4 For statically assigned settings, do the following:
5 Close the TCP/IP Control Panel.
6 Click Save if prompted, to save changes to your configuration.
7 Turn on your Prestige and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.

Macintosh OS X

1 Click the Apple menu, and click System Preferences to open the System Preferences
window.

Figure 64 Macintosh OS X: Apple Menu

2 Click Network in the icon bar.
3 For dynamically assigned settings, select Using DHCP from the Configure list.
Appendix B
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your Prestige in the Router address box.
• Select Automatic from the Location list.
• Select Built-in Ethernet from the Show list.
• Click the TCP/IP tab.
P-2002 Series User's Guide
121