ZyXEL Communications Prestige 2002L Quick Setup Manual

ZyXEL Prestige 2002L Broadband Telephone Adapter

Pack Contents:

1 x Prestige 2002L broadband telephone adapter
1 x power supply
1 x telephone cable (black)
1 x Ethernet cable (red)
1 x CD setup guide

Connecting to the Prestige 2002 Setup Screens

1
Please make sure you have connected the equipment correctly before adding the
settings. Here is a screenshot to help.
2
Change the network settings of your computer so that you can connect with the
Prestige 2002 setup screen. Make a note of your current settings, as you need to
return to these settings later. To change your network settings click:
Start > Settings > Network Connections
3
Select Internet Protocol (TCP/IP) then click on Properties. Set the IP address to
192.168.5.3, the subnet mask to 255.255.255.0 and the default gateway to
192.168.5.1. Leave the DNS information blank. Click OK to apply the changes.
Checking the Prestige's IP address
4
- Pick up your phone's receiver
- Press '****' on your phone's keypad and wait for the message that you are
in the configuration settings menu.
- Press '5' followed by the key.
- Listen to the IP address and make a note of it as this should be the same as
the IP address entered in the Internet Protocol Properties.
- Hang up the receiver.