Alarm Test - FireAngel ST-230 User Manual

ALARM TEST

• Remove the dust cover from each alarm
before use.
• Test the alarms on a weekly basis.
• Keep this guide in a safe place for future
reference.
• Test all alarms after repositioning large
items of furniture to ensure they still
work.
Check the red operating LED flashes once
every 45 seconds in standby mode.
12
Briefly press the test button in the centre
Dust cap
and release.
An audible alarm consisting of two cycles
of three loud beeps should occur and then
stop automatically. The red LED on the
alarm will flash rapidly during the audible
signal.