Alarm Test - FireAngel SI-601 User Manual

ALARM TEST

a Press the test button in the centre and
release.
b The unit will emit a loud (85dB at 3
meters) alarm for around 5 seconds and
stop automatically.
c The red LED on your alarm will flash
rapidly during the audible signal.
NOTE: The test button accurately tests
the alarm's smoke sensing circuit, there
is no need to test your alarm with smoke.
If your smoke alarm fails to give an audible
test signal, please refer immediately to the
trouble shooting guide at the end of this
manual.
WARNING: Test your smoke alarm at
least once per week.
11