Operation; Normal Condition; Low Power Pack Condition; Alarm Test - FireAngel SI-610 User Manual

OPERATION

Normal condition

The red LED on the front should flash every
40 seconds to show the alarm is active.

Low Power Pack Condition

IMPORTANT: Your smoke alarm requires
the power pack to have sufficient
capacity of power to operate correctly.
Should your FireAngel smoke alarm enter a
low power pack condition, the unit will emit
an audible 'chirp' once every 40 seconds.
When this occurs you must replace the
alarm immediately. Your FireAngel smoke
alarm will continue to warn of this low
power pack condition for at least 7 days,
however, failure to change the alarm after
this time would mean your smoke alarm
has insufficient power to alert you in a real
fire situation. When the alarm is removed
from the mounting plate the power pack
will automatically deactivate and the low
power warning chirp will stop, allowing you
to dispose of the alarm.
For disposal see page 18.
10

ALARM TEST

a Press the test button in the centre and
release.
b The unit will emit a loud (85dB at 3
meters) alarm for around 5 seconds and
stop automatically.