Changing Default Scan Job Settings - Epson ET-15000 User Manual

Scan to setting
Remove Shadow
Remove Punch Holes
Clear All Settings
Parent topic:

Changing Default Scan Job Settings

You can view or change the default scan job settings your product uses when you scan to your
computer. You do this using the Event Manager program.
1. Do one of the following to open Event Manager:
• Windows 10: Click
• Windows 8.x: Navigate to the Apps screen and select Event Manager.
• Windows (other versions): Click
Event Manager.
• Mac: Open the Applications folder, click Epson Software, and select Event Manager.
2. Open the Scanner (Windows) or Select Scanner (Mac) drop-down list and select your product, if
necessary.
3. Click Make Job Settings.
4. Open the Edit Job Settings drop-down list and select the scan job settings you want to view or
change.
5. Change the settings as necessary.
6. Click OK.
7. Click Close to close the Event Manager window.
Parent topic:
Available options
On
Off
On
Off
Yes
No
Starting a Scan Using the Product Control Panel
and select Epson Software > Event Manager.
Starting a Scan
Description
Erases the shadows that appear in the center of
a document when copying a book or the
shadows that appear around a document when
copying thick paper
Erases the binding holes on a document
Resets the scan settings to the default settings
or Start > All Programs or Programs > Epson Software >
151